Manuals & Operating Instructions
Getting Started visual guides, operating instructions, engineering-level specifications and material related to spectrometer performance are available. For further assistance, please contact an Ocean Optics representative.
- External Triggering Options for Ocean FX
- External Triggering Options
- External Triggering Options Instructions for Spectrometers with Firmware Version 3.0 and Above
- HR4 Breakout Box
- Flame-T,HR4000 & USB4000 Shutter Performance in Hardware Trigger Mode
- INTSMA Slit
- JAZ-ADP-GPIO Adapter and JAZ-CBL-DB15 Cable Instructions
- Jaz Battery Pack
- Jaz Cable Kit
- Jaz Ethernet Ferrite Installation
- SERIAL-BT-ADP Getting Started
- STS Cable Kit Instructions
- USB-FHS Filter Holder
- USB-ADP-PC Serial Adapter
- USB-ADP-H Serial Adapter (Products: HR2000, USB2000, USB-LS-450, USB-BP)
- USB-ADP-PX2 Serial Adapter
- USB-LS-450 Temperature Recalibration
- USB-TC Temperature Controller
- WUE Wireless USB Extender
UV-Vis-NIR
- DH-2000 (only for models manufactured in the US)
- DH-mini
- ecoVis
- HL-2000 Family
- HL-2000-FHSA Family
- HPX-2000 (only for models manufactured in the US)
- LED Light Sources – LSM Series
- PX-2
- USB-ISS-UV-VIS Integrated Sampling System
- USB-ISS-VIS Integrated Sampling System
Lasers
- DH-3 Plus-CAL (Deuterium-Halogen) (only for models manufactured in the US)
- HL-3 Plus-CAL (Halogen)
- 74-ACH Adjustable Collimating Lens Holder
- 74-UV, 74-VIS Collimating Lenses
- CC-3 Cosine Correctors
- CUV-ALL 4-Way Cuvette Holder
- CUV-QPOD
- CUV-QPOD-2e
- CUV-UV Cuvette Holder
- FHSA-TTL Cuvette Holder with Attenuator and Shutter
- FLAME-DA-CUV-UV-VIS Instructions
- FLAME-DA-CUV-VIS-NIR Instructions
- FOIS-1 Integrating Sphere
- FOS-2X2-TTL Fiber Optic Dual Switch
- Gershun Tube
- INLINE-TTL-S Electronic Shutter
- ISP-REF Integrating Sphere
- ISS-2 Integrated Sampling System
- ISS-UV/VIS Integrated Sampling System
- LPC Liquid Waveguide Capillary Cells
- MPM-2000 Optical Multiplexer
- Smart pH Cuvettes
- STAN-SSH and STAN-SSL Specular Reflectance Standards
- SpectroClip Probe
- Stage-RTL-T Reflection Stage
- SQUARE ONE Cuvette Holder
- USB-FHS Filter Holder
- USB-ISS-UV-VIS Integrated Sampling System
- USB-ISS-VIS Integrated Sampling System
- WS-1 Reflectance Standard
- OceanART Quick Start Guide
- OceanView Installation and Operation Manual
- OceanDirect Programming Manual
o Tech Note - High Speed Averaging Mode with Ocean SR2 - OceanMathCore Programming Manual
- OceanMathArt Programming Manual
- OmniDriver Programming Guide
- OmniDriver API Documentation
- SPAM API Documentation
- USB Programmer
- Jaz – Scripting Language – Programming Guide
- OceanX Updater (RS232 Tech Note)
The OceanX Updater only supports the following spectrometers:
Ocean ST
Ocean HR/SR Series 2
Ocean HR/SR Series 4
Ocean HR/SR Series 6
Ocean Insight no longer supports legacy (discontinued) products and cannot fully guarantee the accuracy of the information in these manuals.
You might be interested in...
USB/RS-232 Port Interface Communications and Control Information for NEW spectrometers (Ocean ST/SR/HR)