CFV-Series FluoroVettes

FluoroVettes Disposable Cells

Product Details

Our FluoroVettes are ultra-low volume, disposable cells for nano-molar range fluorescence detection. These UV- transparent cuvettes require only 50 μl of fluid and slide neatly into a 1-cm cuvette adapter for use in setups with a spectrometer and cuvette holder.

Product Overview

Engineering Specifications

SpecificationsCFV-Series FluoroVettes
Dead Volume2 μL
Dead Volume (tubing interface):Depends on length of tubing at inlet side of FluoroVette; typical ID is 0.030”, OD is 0.063” (1/16”); length of tubing is 1.5” on each side
Contained Volume50 μL (+/- 1 μL)
Dimensions50 mm x 9 mm x 1 mm (Length x Width x Thickness)
Materials
Zeonor Film50 mm (0.002”) (UV-transparent to 220 nm)
Black Delrin0.75 mm (0.030”)
BondingMedical-grade acrylic solvent for bonding Delrin to Zeonor
CompatibilityEthanol (up to 99.5%), Isopropyl alcohol (up to 91% water), aqueous buffers with or without detergents
IncompatibilityAcetone or aliphatic solvents such as hexane
Connectors
For CFV-PIP-SPAcrylic
For CFV-PUMP-SPPolysulfone
For Tube ConnectionTranslucent FEP for tubing; glue is a solvent-less UV-curing medical-grade adhesive

Available Items

There are two types of FluoroVettes. The CFV-PIP-SP has an inlet port for loading the sample into the FluoroVette with a standard 20-200 μL pipetter and ordinary tips, making it a snap to fill and perform measurements.

The CFV-PUMP-SP has tubing barbs at the inlet and outlet ports so the FluoroVette can be used in continuous or flow injected measurements using a syringe or peristaltic pump.

ItemDescription
CFV-PIP-SP10 pack Pipettor UV-transparent FluoroVettes with adapter
CFV-PUMP-SP5 pack Pump UV-transparent FluoroVettes with adapter

Regulatory

Contact Us